AUTOOL HTS559 Walnut Sandbalster, Automotive Engine De-Carbon Clean Machine, 1400W Intake Pipe Valve Carbon Deposition Cleaning Tool W/ 30L Capacity for Remove All Vehincles Carbon Deposits

AUTOOL HTS559 Automotive Sandbalster Features: Natural Safe Walnut Sand: HTS559 walnut blaster kit adopts natural walnut abrasive, physically harmless cleaning, without causing any chemical corrosion to the surface metal components. 1400W High-Power Motor: HTS559 intake valve cleaner features a powerful 1400W high-performance motor combined with an external air source to create strong suction. Make the walnut sand more powerfully, even stubborn carbon deposits can be removed quickly and thoroughly. Deep Carbon Removal: HTS559 automotive engine carbon cleaning machine has dual functions of Intake manifold cleaning and intake / exhaust valve cleaning. And effectively removes the highly sticky carbon deposits on the intake manifold, intake & exhaust valves. Solve the problems of unstable idling, insufficient fuel combustion, and reduced air-fuel ratio. Integrated Design: Walnut sandblaster for simultaneous spraying and recycling of walnut grit. After cleaning, the sandblaster’s built-in dust filter separates the recovered walnut grit from the carbon deposits so that it can be recycled and reused, reducing costs. Widely Application: HTS559 intake cleaner is equipped with 5 types of adapter fittings, suitable for the cleaning needs of most vehicles on the market. 5 types adapter suitable for Audi, BMV, GM, Benz, Land Rover. If you need to adapt to more models, you can purchase the corresponding connector adapter. How To Use AUTOOL HTS559 Automotive Sandblaster? 1. Install hose connectors for recycling particles. Connect external origin plug. 2. Open head cover of AUTOOL HTS559 and pour into walnut powder (need 3-5KG ), press dust guard on walnut powder then close cover. 3. Turn on the power switch, and the machine starts to work.Connect the sandblasting gun and hose connector together to the engine manifold port, and confirm that they are well sealed. 4. Pull the sandblasting switch and start to enter the de-carbon procedure (generally, one manifold port can be cleaned up for about 2 minutes and then stop to check the cleaning effect). 5. After cleaning the carbon deposits, use a dust blowing to blow out the remaining sand particles. HTS559 Walnut Sandbalster Specifications: Power Supply: AC 110V±10% Main Power: 1400W Input Frequency: 60Hz Sand Volume: 30L Environment Temperature: -10°C~+40℃ Relative Moisture: <85% Dimension: 17.1 x 17.1 x 27.8" Product Weight: 26.45 lbs Package Weight: 29.76 lbs Package Includes: 1 x AUTOOL HTS559 De-Carbon Clean Machine Unit 2 x Spray Gun 1 x Goggles 1 x Recycle Hose 1 x Spray gun Connector 5 x Connect Adapters AUTOOL HTS559 Carbon Deposit Cleaning Machine Note: 1. AUTOOL HTS559 walnut sand de-carbon machine is specail for intake pipe and intake valve back side clean only, if you want to clean carbon deposition on injector/throttle valve/cylinder, please choose AUTOOL CT150, CT160, CT200, CT400 or C100. 2. Engine should be closed before clean, then turn crankshaft to close intake valve. AUTOOL HTS559 clean one intake pipe each time, 6 cylinder engine should cleaned 6 times one by one(and so on). 3. The package only contains the amount of walnut powder for one wash. If you need more, please purchase it separately. 4. High pressure air pump is requirement(not include in package). 5. Walnut powder residual in intake pipe will go to ashes in high temperature after engine start.