AUTOOL CT450 Fuel Injector Tester Cleaner, Ultrasonic 50℃ Heat Cleaning Machine, 6 Cylinders Petrol Nozzle Injection Tester W/ 9 Adapter for GDI EFI FSI Standard & Long Injectors

CT450 Fuel Injector Cleaner & Tester Features: Ultrasonic & Heating Cleaning: The AUTOOL CT450 adopts ultrasonic cleaning technology, It utilizes high-frequency vibrations to generate a cavitation effect in the liquid, thoroughly removing stubborn impurities from the gaps in the injector while ensuring no wear to the injector's surface. And CT450 is equipped with an intelligent constant temperature heating function, which automatically heats the cleaning fluid to the optimal working temperature (50°C) during the cleaning process, effectively enhancing the activity of the cleaning solution and more effectively removing stubborn impurities from the fuel injector. Six-cylinder Detection: CT450 is equipped with 6 test tubes of 110ml, allowing for simultaneous testing of up to 6 fuel injectors and providing efficient service. It simulates injector operating conditions, you can clearly compare injector changes and understand the real-time condition of the injectors and accurately assess their performance. Smart Control Panel & Voltage Selectable: CT450 injector cleaning machine adopt a HD backlit digital screen and graphical function buttons for clear data display and intuitive operation. Within the specified parameter range, you can flexibly adjust test pressure, test duration, and pulse width. Additionally, It supporting three voltage options: 12V, 70V, and 120V and features intelligent voltage recognition for injector drive and will automatically alert if the selected voltage is mismatched. Detail Highlights: Test fluid level gauge: monitors the real-time test fluid level, allowing timely replenishment when low. Glass tube lighting: ensures clear visibility of the injector test status, even in dim environments. Cleaning liquid drain valve: recycles used cleaning fluid in a timely manner, followed by cleaning and maintenance of the cleaning tank. Bottom drawer: built-in drawer at the bottom, which does not require extra storage management and can store various connector accessories. Side handle design: enhances portability, making movement more convenient and comfortable. Widely Compatible: AUTOOL CT450 fuel injector tester is equipped with 9 different composite adapter specifications, fully compatible with the cleaning and testing requirements of GDI, EFI, FSI, and conventional fuel injectors, suitable for most car injectors of major car brands such as Mercedes-Benz, BMW, Audi, Porsche, Ford, etc. AUTOOL CT450 13 Types Cleaning & Testing Functions: 1. Ultrasonic Heated Cleaning: It sends signals to the injector through the pulse signal line, and utilizes the ultrasonic vibration of the cleaning liquid to completely remove the carbon and impurities in the injector. During the cleaning process, the fluid is automatically heated up to 50°C, which enhances the cleaning ability. 2. Reverse Flush: The test liquid flowing from the outlet to the inlet of the injector. Reverse flush may remove the dirt inside the injector or the injector Strainer (Only for the top fuel supply injector). 3. No-disassembly Cleaning: Direct cleaning without disassembling the injectors, this function is an additional function, which requires special adapters. 4. Idle Speed Test (0-20ms): Simulate engine idle speed operation to test injector performance. 5. Medium Speed Test (0-7.5ms): Simulate the engine running at medium speed and test the state of the fuel injector. 6. High Speed Test (0-4ms): Simulate the high-speed performance of the engine and test the state of the fuel injector. 7. Acceleration Test: Simulate the engine's state from static to acceleration to test injector performance. 8. Variable Speed Test: Simulate the variable Speed of the car and test the working performance of the fuel injector. 9. Leakage Test: Simulate the dynamic liquid pressure inside the container during engine operation to test the sealing condition of the fuel injector. 10. Idle Injection Volume Test: Simulate the engine's idle state to test the spraying performance of the injector. 11. Medium-Speed Injection Volume Test: Simulate the engine's mid-speed state to test the spraying performance of the injector. 12. High-Speed Injection Volume Test: Simulate the engine's high-speed state to test the spraying performance of the injector. 13. Pulse Injection Test: Simulate the engine's idle speed and load conditions to test injector performance. CT450 Feuel Injector Tester Specifications: Power supply: AC 110V±10% Frequency: 50-60Hz±0.5 RPM Range: 0～7500 r/min Fuel Injection Count: 0~9900 times PWM Pulse Width: 0～20.0 ms System Pressure: 0~0.6Mpa (adjustable) Time Settings: 0-10min (adjustable) Ultrasonic Cleaning Power: 70W (intermittent work) Ultrasonic Cleaning Frequency: 28 KHz±0.5 KHz Cleaning Tank Capacity: 2000ml Test Tube Capacity: 110ml Relative Humidity: <85% Ambient Temperature: 0℃～＋40℃ Item Dimensions: 13.1 x 12.8 x 13.8" Package Dimension: 17.32 x 17.72 x 19.68" Item Weight: 37.26lbs Package Weight: 37.48lbs About AUTOOL CT450 Notes: Cleaning solution and test solution (industrial alcohol) should not be confused. The glass cylinders are used to contain testing liquid, which is usually professional fuel injector testing liquid, or industrial alcohol. To avoid corrosion, DO NOT put cleaning liquid or any other corrosive liquid in cylinders. It is recommended to use professional automotive injector test fluids. If not available locally, it is recommended to use medical alcohol with an alcohol content of more than 75% instead of the test solution. The ultra-sonic tank is used to contain cleaning liquid, cleaning liquid is usually corresive, please be careful, do not mistake cleaning liquid with testing liquid. Please do not add other liquids, if you are not sure whether the liquid is correct, please contact us in advance and attach picture.