Automotive Smoke Machine Leak Detector, EVAP Smoke Machine Leak Tester for All 12V DC Vehicles in Vacuum, Built-in Air Pump and Pressure Gauge, Flow Meter Dual Mode

Built-in air pump and dual modes for air and smoke Godiag A8 EVAP smoke machine not only has a built-in air pump, but also has a pressure gauge and an adjustable flow meter. The compressor generates air pressure is 1.03Bar/15Psi, allowing smoke to be easily introduced into the tested sealing system, speeding up the leak detection process. Two ways to quickly solve leaks - air mode helps you determine if there's a leak; and smoke mode helps you locate leaks. ADJUSTABLE AIR FLOW METER & PRESSURE GAUGE You can easily control the air pressure, because if the air pressure is too high, the pipe will be damaged, and if the air pressure is too low, the leak will not be detected; You can observe the barometer to determine whether the car pipeline is leaking. If the barometer index keeps increasing, there is no problem with your car’s pipeline. On the contrary, your car’s pipeline leaks need to be repaired. Easy to Use 1. Fill 10ml-20ml test Johnson baby oil pink label (the most suitable oil) to the detector. 2. Disconnect the intake pipe of the car. Connect the intake pipe of the car with the detector. 3. Connect the detector with the DC12V battery, and it starts to work. 4.The pipe will be filled with smoke. Check the leak points. Note: The packaging does not contain oil but there is an oil delivery bottle. Warm Notice Evap smoke machine can't be connected to the 12V power supply in the office, or it cannot output the smoke. It just supports a 12V battery with a current range of 8A-10A (Ordinary car batteries are eligible). If you have any questions, you can first contact us, we're here all the time.