Audio-Technica BPHS1 Broadcast Headset w/ Boom Mic + Rockville RCM PRO Studio Condenser Mic (Package)

Package contents: 1x Audio-Technica BPHS1 over-ear broadcast stereo headset with boom microphone; 1x Rockville RCM PRO studio/recording condenser microphone with Samsung capacitors. Audio-Technica BPHS1 overview and features: - Broadcast-focused over-ear stereo headset with an integrated boom microphone designed for clear, highly intelligible vocal delivery. The microphone’s polar pattern and frequency response are tuned for natural speech reproduction. - Closed-back circumaural ear cups minimize crowd noise and other ambient distractions. Both the headset and microphone employ neodymium magnets for strong output and detailed sound. - The dynamic microphone uses a cardioid pickup pattern to reject off-axis sound. The boom can be mounted on either the left or right side for user preference. - Lightweight construction with an adjustable cushioned headband provides extended wearing comfort. Rugged build includes user-replaceable ear pads and cable. - Detachable cable (BPCB1) terminates in a 3-pin XLRM-type connector for the microphone and a ¼” 3-conductor plug for the headphones. BPHS1 technical specifications: - Headphone type: Closed-back dynamic - Microphone type: Cardioid dynamic - Headphone driver diameter: 40 mm - Headphone magnet: Neodymium - Voice coil: Copper-clad aluminum wire - Headphone frequency response: 20 Hz - 20 kHz - Microphone frequency response: 40 Hz - 20 kHz - Maximum input power: 1,600 mW at 1 kHz - Headphone sensitivity: 100 dB - Microphone sensitivity: -57 dB (1.4 mV) re 1V at 1 Pa - Headphone impedance: 65 ohms - Microphone impedance: 560 ohms - Product weight: 264 g (9.3 oz) - Product dimensions: 82.0 mm (3.23") wide (earcup); 46.0 mm (1.81") wide (headband); 180.1 mm (7.09") long (boom), microphone extended; 24.0 mm (0.94") diameter (microphone) - Cable: 3.3 m (10.8') long with 8-pin connector at headset end; 3-pin XLRM-type connector (microphone) and 6.3 mm (1/4") phone plug (headphone) outputs - Accessories included: 3 windscreens, spare connector screw Rockville RCM PRO condenser microphone highlights: - Professional large-diaphragm condenser for studio and recording use, engineered for smooth, natural capture with low self-noise. - 25mm large cartridge provides a larger pickup area. Two large capacitors (22μ50V and 47μ16V) are used in the design. - The large diaphragm yields balanced bass, mids and highs, with high SPL handling and a wide dynamic range. - Cardioid polar pattern reduces pickup from the sides and rear to minimize unwanted noise. Element is a fixed-charge back plate, permanently polarized condenser. RCM PRO specifications: - Frequency response: 20Hz - 20 kHz - Open circuit sensitivity: -30dB ±2dB (0dB = 1V/Pa @ 1 kHz) - Impedance: 100 Ohms - Equivalent noise level: ≤ 23 dB A (IEC581-5) - Maximum input sound level: 142dB SPL (THD ≤ 1.0% @ 1 kHz) - Electrical current: ≧500Ua - Noise: 20dB SPL - Dynamic range (typical): 124 dB, 1 kHz @ Max SPL - Signal-to-noise ratio: 74 dB, 1 kHz @ 1 Pa - PCB layout: Surface mount fixed - Crossover filter cutoff frequency: 50Hz - 16 kHz - Power requirements: 48V DC phantom power or computer sound card - Output connector: 3-pin XLR Physical and shipping details for RCM PRO: - Product weight: 0.74 Lbs - Product height: 7.44" inches - Shipping weight: 3.32 Lbs - Shipping dimensions: 13.98" x 7.87" x 3.15"