ANCEL FX8000 Automotive OBD2 Scanner Code Reader Car All System Oil EPB ABS Diagnostic Scan Tool

✔️Ancel FX8000 Full System Fault Scan& Diagnostic This option allows you to detect whether the car full system parameters are normal or not. It mainly including Drive System, Chassis System, Body System, Electrical system. Read and erase codes fit for all available systems, turn off MIL light (Indicator light), display live data in text, graph & analog fit for easy data review.

❇️PCM(Drive System): Engine, Transmission, Transfer case, Electrical Machine Electronics, Fuel Pump, Gear, and more... ❇️Chassis System: Accumulator Management Electronics, Steering, Integrated Chassis Management, Tyre Pressure Control, Active Cruise Control, Braking System, Suspension, TPMS and more...

❇️BCM(Body System): SRS Airbag, Camera, Audio Radio, Gateway, Cluster Dashboard, Rain Sensors, Charging Interface Module, Parking Assistance, Power Control Unit, Touch box, Light, Battery Charging System, Head up Display, Wipe Control System, Roof, Seat & Door Motor system, Immobilizer, ABS ESP system, Air Condition.Electric Windows, Telephone, and more...

❇️Electrical System: Including Centralized control system fit for engine and power transmission, Chassis integrated control and safety system,Intelligent body electronic system,Communication and information / entertainment system.

7+ Special Functions ✴️Oil Service Light Reset :Oil Light Reset allows you to reset the service after car service ✴️EPB Service Reset: EPB Service allow you perform the service and maintance of brake systems, include de activation and activation of brake control system. bleeding brake fluid, opening and close brake pads, and setting brakes after disc or pad replacement, on multiple brands of vehicle where electronic brake systems are fitted.

✴️ABS Bleeding: Whenever you change a part of the brake system, you will need to bleed the brake system afterward. This means removing all the air in the system. Due to the air is compressible, it would make the brake pedal will feel soft. Once the brake pedal being soft and mushy, the air will have to be pushed out of the way before the fluid can do what it is supposed to do.

This can be dangerous because it means that it will take longer to stop. ✴️Throttle Adaptation: The throttle body is a tube containing a pivoting flat valve (butterfly) that is used to control the amount of air entering an engine.

In an electronically fuel injected car, a throttle position sensor and air flow sensor communicate with the computer, which supplies the corresponding amount of fuel needed at the injectors. It must need re-learning throttle sensor position after clearing or repair. ✴️SAS Calibration: Steering angle sensor calibration allows you to perform calibration of the steering angle sensor.

It permanently stores the current steering wheel position as straight-ahead in the sensor EEPROM. After calibrating the sensor successfully, its fault memory will be automatically cleared. ✴️BAT battery service : Allows the scan tool to evaluate the battery charge state, monitor the close-circuit current, register the battery replacement, and activate the rest state of the vehicle.

✴️Engine Code & light Reset : Read and clear engine codes , and shut off warning light . ✴️Kind reminder: These Special functions doesn't fit for all car models , please telling us your car VIN to confirm before order , thanks . Full OBDII Functions ⚛️Reading Codes: Present some diagnostic trouble codes after scanning the vehicle.

⚛️Reseting Codes: Clear the fault codes after doing the repair according to the prompt of the scanner. ⚛️Live Data Stream: Show the information of continuous data stream from a vehicle in live graphic (waveform) display. ⚛️I/M Readiness: Shows whether the various emissions-related systems on the vehicle are operating properly and are ready fit for inspection and maintenance testing.

⚛️Freeze Frame: Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data. ⚛️On-Board Monitor Test: Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.

⚛️O2 Sensor Test: Allows retrieval and viewing of O2 sensor monitor test results fit for the most recently performed tests from the vehicle’s on-board computer. ⚛️On-Board Monitor Test: Retrieves and displays test results fit for emission-related powertrain components and systems.

⚛️Read Vehicle Information: Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc. ⚛️Component Test: Certain vehicle components can be actuated by commands sent from the scanner to test their operabilit.

Other Features 💥Live Data in Graph& Test The NT624 Elite code reader car diagnostic tool will show you real-time data in text and graph like engine speed, engine coolant temperature, fuel system status, short term fuel trim & etc. 💥AutoVIN Technology Available Press "AutoVin" to quickly detect VIN module, it shows VIN, vehicle type, release year and engine type.

💥DTC Lookup Function With the built-in DTC lookup function, you can quickly know the meaning of fault code though this code reader&scan tool. It is easy to pin point and check out many issues on your vehicle that a normal OBDII Reader can not get. To a certain extent, you are earlier to know the exact issue and reduce the possibility to be cheated by some unreliable small mechanic shop.

🚗Wide Vehicle Coverage America Vehicles ( after 1996 -nower ) : Asia Vehicles (after 2002-nower ): European Vehicles ( after 2001 -nower ): China Vehicles ( after 2008 -nower) Lifetime Free Updatesvia Wifi Our Product Support Lifetime Free Update Online, you will always have the latest bug fixes, new vehicles, newly added parameters and functionality at your fingertips.