ACOMWY HDMI Extender Over LAN 394ft/120m - Single Cat5e/Cat6A/Cat7, HDMI to RJ45 Adapter, Uncompressed 4K@30Hz & 1080P@60HZ, 3D/EDID/HDCP Support

ACOMWY HDMI Extender transmits uncompressed HDMI over a single Cat5e / Cat6A / Cat7 cable up to 394ft/120m, delivering 4K@30Hz or 1080P@60HZ video with full HDCP, EDID and 3D compatibility. The kit includes a transmitter (TX) and receiver (RX) pair that supports one-to-many cascaded links, local loop-out, and real-time lossless signal delivery for displays, projectors and AV systems. Key capabilities - Uncompressed HDMI video: up to 3840x2160@30Hz (4K@30Hz) and 1080P Full HD at 1080P@60HZ - Audio formats: DTS-HD, Dolby-TrueHD, DTS, Dolby-AC3, DSD and LPCM - Max bandwidth: 340 MHZ; Maximum Transmission Rate: 3x3.4Gbps (Max baud rate support 3x3.4Gbps) - Supports HDMI loop-out on the TX so the source can feed a local display; both TX and RX support local loop-out - 3.5mm channel audio output available - IR echo support for remote control extension (use IR RX/IR TX cables on 3.5mm ports) - EDID Button toggles output resolution between 1080P and 4K (4K is the default EDID at power-on) Reliability and protection - High-performance chipset for stable A/V transmission, efficient heat dissipation and extended durability - Adds static electricity prevention to withstand external 8KV voltage - New isolation transformer, anti-surge and anti-heating design to protect components - Real-time lossless transmission with signal amplification for long runs Power and cabling - Power adapter: Input AC 100V-240V (50HZ/60HZ), Output DC 5V/1A; micro USB 5V power supply supported - Maximum recommended HDMI input/output cable length: <=15m, AWG26, HDMI standard cable - CAT-5E / CAT-6 cable length between TX and RX: up to 120 meters (high-quality network cable) — transmission up to 120m/395ft - Maximum working current: TX: 350mA; RX: 20mA - Input Video Signal: 5 Volts p-p (TTL) Setup (quick connection guide) 1. Connect your HDMI source to the transmitter (TX) using an HDMI cable (max 15m). 2. Connect the receiver (RX) to the display with an HDMI cable (max 15m). 3. Link TX and RX with a single Cat5e or Cat6 (recommended) / Cat7 cable (up to 120m). 4. Attach the IR RX and IR TX cables to the 3.5mm IR ports on the transmitter and receiver if remote control extension is required. 5. Connect the 5V power supply to TX and RX (micro USB or DC 5V/1A adapter). 6. LED indicator: steady blue light when an input signal is present and the unit is working. Additional features - Cascading/in-series support for extending distance or distributing to multiple receivers (one send, multiple receive) - Local ring-out and signal amplifier for maintaining image quality over long runs - Plug-and-play operation with no driver installation required This ACOMWY HDMI Ethernet Extender provides a robust, protected solution for extending high-definition HDMI signals over standard network cabling while preserving audio/video quality and remote control functionality.