500W Pure Sine Wave Solar Power Inverter — DC 12/24/36/48/60/72/96/110V to AC 100/110/120/220/230/240V Portable Car DC→AC Converter

Overview: Portable 500W pure sine wave inverter designed for solar and vehicle use. Converts a wide range of DC input voltages to standard AC outputs with clean, grid-like power and 1000W surge capacity for motor starts and other transient loads. Soft-start and active cooling ensure stable operation under varying conditions. Key component design and build: - High-frequency transformer used as the core to convert DC into steady, full AC output. - Imported capacitor for higher current capability, improved performance and longer service life. - True copper inductance to filter waveforms and guarantee a genuine pure sine wave AC supply for sensitive devices. - All big mosfet construction for higher load capacity and consistent continuous output. - Thick PCB (2.00mm) to allow higher current flow on the board and increase load capacity. - Large radiating flange and extra venting for enhanced heat dissipation. - Earth line connection present on both the PCB and the AC output for safer operation. - EMC tested to avoid interference with TVs, radios and other equipment; minimal noise. - LED display to monitor input and output voltages in real time. Technical specifications: - DC Voltage options: 12V or 24V or 36V or 48V or 60V or 72V or 96V or 110 - Voltage Range: 10-15VDC or 21-30VDC or 30V-45VDC or 42-55VDC or 55V-75VDC or 60V-90VDC or 85V-120VDC or 100-130VDC - NO Load Current Draw: <1A - Efficiency: >90% - DC Connector: Cables With Clips or Car Adaptor - AC Voltage: 100/110/120VAC or 220/230/240VAC - Continuous Power: 500W - Surge Power: 1000W - Waveform: Pure Sine Wave - Frequency: 50HZ or 60HZ - AC Regulation: 3% - Total Harmonic Distortion THD: <5% Protection, controls and indicators: - Protection systems include Thermal protection, Overload protection, Over Voltage protection, Under Voltage protection and Low Voltage protection. - Inverter includes LED indication and alarm for fault conditions. - Advertised nine kinds of protections, including: 1. Short circuit protection — inverter shuts down on a shorted load. 2. High temperature protection — inverter stops if cooling is insufficient and temperature exceeds rated limits. 3. High voltage protection — inverter stops when battery voltage rises above the rated level. 4. Low voltage protection — inverter will stop when battery voltage falls below the rated threshold. Voltage alarm and shutdown points: - Low Voltage Alarm: 10DC±0.5V or 20.5DC±1V or 32.5VDC±1V or 44.5VDC±1V or 55.5VDC±1V or 68VDC±1V or 92VDC±1V or 105VDC±1V - Low Voltage Shut Down: 9.5DC±0.5V or 19.5DC±1V or 31VDC±1V or 42VDC±1V or 55VDC±1V or 60VDC±1V or 84VDC±1V or 100VDC±1V - Output Over Voltage Shut Down: 15.5V or 30.5V or 45.5V or 55.5V or 75.5V or 90.5V or 110.5V or 120.5V Environmental and mechanical: - Over Load Shut Off Output - Over Thermal Shut Off Output Automatically - Short Circuit protection - Working Temperature: Between -10centi and +50centi - Storage Temperature: Between -30centi and +70centi - Working Humidity: 20%~90%RH non-condensing - Start: Soft Start - Cooling Ways: Cooling Fan - Machine Size (mm): 240*200*95 - Packing Size (mm): 360*230*160 - Net Weight (kgs): 2.3 KG - Gross Weight (kgs): 3.5KG - Packing Type: Carton Packing Additional features and benefits: - Pure sine wave output comparable to mains power, suitable for sensitive electronics. - Full Power Core Technology with advanced software control and German design influence. - SMT (Surface Mounting Technology) assembly and quality components for reliable performance. - Low no-load current draw and durable construction advertised for up to 10 years of usage. - Multiple socket/wiring options, big current connectors and strong AC terminal block for secure connections. - Compact, lightweight single-layer design for easier maintenance and repair. What’s in the box: inverter unit with options for DC cables with clips or a car adaptor, carton packing. This inverter is built to provide robust, clean AC power from a variety of DC sources while protecting both the inverter and connected loads with multiple protective measures.