4800W 41MM Electric Wall Chaser Groove Metal Concrete Cutting Tool Molding Slotting Machine

High Efficiency: Adopting a 4800W all-copper motor and high-strength diamond alloy blades, this machine has a high load speed(6500rpm) and can slot at 90 ° without dead angles, ensuring high efficiency and continuous use without burning out. Adjustable Slotting: It can accommodate up to 7 5.23-inch blades, and the cutting depth and width can be adjusted by changing the size and number of blades with a maximum of 1.61" in depth and 1.65" in width. You can adjust the blade according to your needs to cut a more suitable area. Ergonomic Design: The front auxiliary handle is 180° adjustable and the rear main handle is 90° rotatable, together with optimized weight distribution that gives you better control while cutting, allowing you to find the most comfortable angle for labor-saving operation and meeting different work requirements without scraping your hands when slotting into the corners. Notes Please note that it is necessary to test this product before use. Please do not use it if the test fails. Please note that when using a water pump, the machine head should be facing downwards to prevent water from entering the body. Please do not use this product in rainy or other adverse weather conditions. When cleaning the machine head, water should be avoided from entering the machine body through the vent. Please beware of potential safety hazards in electricity use. Please use this product according to the English manual, take necessary personal protective measures, and keep them out of reach of children. Please note that this product can be used in conjunction with a vacuum cleaner (not included). When using a vacuum cleaner to slot, when the bottom plate is adjusted to the bottom position, the front protective cover is fully attached to the wall (ground), thereby achieving a better vacuum suction effect. Please note that the water pump and vacuum cleaner cannot be used simultaneously. Please regularly check the wear of the carbon brush. When there is a large spark, the carbon brush should be replaced promptly. The cutting blade is a consumable material that is easily damaged. If there is any damage, please replace it on time. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order.