2500W Pure Sine Wave Hybrid Solar Inverter (12/24/36/48V DC Input) to 100/110/120/220/230/240V AC — 5000W Surge, LCD Display + 30A PWM Solar Charger

Overview: Off-grid pure sine wave hybrid inverter delivering 2500W continuous power with 5000W surge capacity. Built for 12V/24V/36V/48V battery systems, the unit includes an LCD display and an integrated 30A PWM solar charge controller suitable for standalone solar installations and vehicle use. Inverter electrical specifications: - DC input options: 12V or 24V or 36V or 48V - DC operating ranges: 10-15VDC or 21-30VDC or 42-60VDC - No-load current draw: <1A - Efficiency: >90% - DC connector: Cables with clips or car adaptor - Selectable AC output: 100 / 110 / 120 V or 220 / 230 / 240 V AC - Continuous output power: 2500W - Surge (peak) power: 5000W - Output waveform: Pure Sine Wave - Frequency: 50Hz or 60Hz - AC regulation: ±3% - Total Harmonic Distortion (THD): <5% Battery protection and thresholds: - Low voltage alarm: 10DC ±0.5V or 20.5DC ±1V or 44VDC ±1V - Low voltage shut down: 9.5DC ±0.5V or 19.5DC ±1V or 42VDC ±1V - Over-voltage shut down: 15.5V or 30.5V or 61.2V - Overload: automatic shut-off of output - Over-temperature: automatic shut-off of output - Start mode: Soft start - Cooling: Cooling fan Operational limits and physicals: - Fuses: Short circuit protection - Working temperature: Between -10°C and +50°C - Storage temperature: Between -30°C and +70°C - Working humidity: 20% ~ 90% RH (non-condensing) - Machine size (mm): 350 * 240 * 220 - Packing size (mm): 470 * 300 * 250 - Net weight: 6.5 KG - Gross weight: 9 KG 30A Solar Charger (PWM) specifications: - Rated current: 30A - Rated voltage: 12V / 24V - Open-circuit voltage (solar panel): 50V - Low Voltage Disconnect (LVD): 10.7V / 21.4V - Float voltage: 13.8V / 27.6V - Low Voltage Reconnect (LVR): 12.5V / 25.0V - No-load loss: 30mA - Loop voltage drop: 170mV - Charging mode: PWM mode - Temperature compensation: -4mV / cell / °C - Protections: thermal protection, overload protection, over-voltage protection, under-voltage protection, low-voltage alarm - Charger includes LED indication to identify fault conditions Protections (overview): The inverter incorporates multiple protection mechanisms to safeguard the system: 1. Short-circuit protection — inverter will stop if a short is detected. 2. High-temperature protection — unit will shut down if ambient/operating temperature exceeds safe limits. 3. High-voltage protection — input voltages above rated values cause the inverter to stop. 4. Low-voltage protection — inverter cuts input when battery voltage falls below thresholds. 5. Surge protection — guards internal electronics from DC high-voltage spikes. 6. Overload protection — inverter ceases output when connected load exceeds rated power. 7. Over-current protection — onboard protection components cut output when load current exceeds limits. 8. Fuse protection — fuses on the sockets will operate automatically to protect the system. This inverter/charger package is suited for off-grid houses, RVs, boats and car power applications where reliable pure sine output, robust protections and a built-in 30A solar controller are required.