24V Electric Scooter Controller, 8A,12A, 3000RPM, 120kg Capacity, Remote Included

The sinusoid solution makes it more stable than ESC and not easy to burn out. The single driver design is composed of high‑quality chips and electronic components, which can provide excellent and stable performance. The sturdy structure of the motherboard can greatly extend the service life. Low speed and high torques. Two‑way communication, you can check the power of the skateboard through the remote control. Multiple protections, with low-voltage alarm function, under-voltage and power-off protection. Four gears, 1 low speed. 2 medium speed. 3 high speed. 4 player mode EBS electronic brake the battery will be charged when the brake is sliding downhill. The maximum valve current is 10A One key to turn forward/reverse direction Wireless 2.4G remote control transmission control. 20 frequency points. Automatic frequency hopping anti-collision Maximum valve current 40A Controller features: low Speed and high torques Maximum Speed: 3000 revolutions of hub motor positive Xuanbo, 7500 revolutions of belt motor rectangula. One-key switch. Long press for 10 seconds to enter the paired remote control state refer to item 20. The button LED working indicator is the connection status indicator with the remote control flashing when the connection is successful, and the connection is unsuccessful, long on Hub motor. Choose by yourself without feeling or feeling common for control boards Control method: sinusoid/rectangula Equipped with motor. Hub motor 70.83.90. Motor. 80KV / model airplane motor 270KV or less, the effect is better Three modes of control, four-wheel brushless controller integrated Two modes: Hall sinusoid automatic learning motor The second mode: Hallless rectangula compatible with 99% motors on the market including non-inductive model airplane motors The third mode: there is a hall sinusoid fault repair mode when one of the three halls of the motor is broken, it will repair and simulate the failed hall after the program is checked. If the two halls of the motor are broken, the program will automatically switch to No Hall rectangula mode The program is repaired by Hall. If the Hall is broken, one can operate normally/rectangula without affecting normal use. Motor wire short-circuit protection. Motor wire off protection / stall protection / high valve current protection / battery under voltage protection / over current / over voltage / overload current limit protection. Undervoltage buzzer alarm: a total of four alarm sounds, one beep 40% power two beeps 30% power three beeps 20% power four dididi beeps 10% power Didididi will enter under-voltage protection after four beeps, which effectively protects the battery from over-discharge and damage to the battery. The same goes for the remote control low voltage alarm. It is equipped with a mobile phone APP port, which can set various parameters of the control panel, and the remote control has two-way communication. Description of remote control matching: When the host is powered on, press the matching remote control button on the motherboard the button is side to the buzzer or press and hold the power button for 10 seconds. When the red LED is flashing, the host is waiting for remote control pairing, then tap the remote control Hide button side to the remote control switch on, the main board LED light and the remote control LED light will flash at the same time, the remote control is matched successfully. Naught power consumption standby: 10 minutes to enter the standby state. Standby power consumption is naught No button sliding automatic switch: After playing skateboarding, you don’t need to squat down and press the scooter shutdown button. The scooter will shut down by itself in 10 minutes. The shutdown power consumption is 0, and the standby power consumption is 0 when it is not on. Every time you play skateboarding again, you don’t need to squat down and press the scooter power button, and lightly kick the scooter with your foot. The scooter will power on automatically and wait for the remote control order after powering on. Do not drive or interfere with the sliding of the motor, leaving the motor in the unpowered scooter mode If the scooter is out of power, the kick scooter will still turn on, unless the battery protection board protects and there is no power output, after the scooter is turned on, it will not affect the user to regard the powered scooter as unpowered. There will be a low battery alarm sound on the mainboard, and the mainboard will not drive or interfere with the sliding of the motor without receiving a remote control order. Operating temperature range: -20°C to +120°C, normal operation ±5°C Operating humidity range: 10% to 95%RH normal operation ±5 RH