2007-2013 Toyota Tundra Crew Max Dual 12" Sub Box + 2× Harmony HA-R124 Subs + Kicker CX300.1 Amp + HA-AK10 10GA Kit

Package contents: 1 x 2007 - 2013 Toyota Tundra Crew Max Truck Dual 12" Sub Box Subwoofer Enclosure; 2 x Harmony Audio HA-R124 Rhythm Series 12" Package Sub; 1 x Kicker CX300.1 CX Series Class D 600 Watt Subwoofer Amplifier; 1 x Harmony Audio HA-AK10 Complete 10 Gauge 600W Amp Install Kit (Nickel). Custom Dual 12" Subwoofer Enclosure (fits 2007-2013 Toyota Tundra Crew Max Truck): Built for installation behind the rear seat with the subwoofers facing the front of the cab. Sealed enclosure constructed from high quality MDF and finished in high quality black carpet. Mounting depth: 4-1/2". Internal air space: 1.02 Cubic Feet per sub. Terminal: high quality twist knob / banana plug terminal cup (accepts bare wire up to 10GA). Overall dimensions: 45-7/8" L x 8-1/2" W x 16-5/8" H. Harmony Audio HA-R124 Rhythm Series 12" Subwoofer (each): Power handling — Peak: 600 watts, RMS: 300 watts. Sensitivity: 88.2 dB. Frequency response: 27 Hz - 1.8 kHz. Mounting depth: 5 11/16". Mounting cutout diameter: 11 1/8". Recommended enclosure volumes: Min sealed box volume: 1.25 cu ft, Max sealed box volume: 3.52 cu ft. Min vented box volume: 1.65 cu ft, Max vented box volume: 2.3 cu ft. Voice coil / load: Single 4 Ohm. Kicker CX300.1 CX Series Single-Channel Class D Amplifier (600 Watt max): RMS power — 4 ohms: 150 watts x 1; 2 ohms: 300 watts x 1. Max power output: 600 watts x 1. Pulse Width Modulated MOSFET power supply. LED indicators: power (green) and protect (red). Variable bass boost: 0 to +12 dB at 40 Hz. Single-channel operation with speaker-level (high-level) inputs and signal-sensing automatic turn-on. Preamp RCA outputs for daisy-chaining additional amps. Protection: 3-way circuitry (thermal, overload, and speaker short protection). Dual speaker terminals for easier multi-speaker hookup. Heavy-duty aluminum alloy heat-sink. Nickel-plated RCA level inputs and nickel-plated screw terminals. Input sensitivity: Low level: 125 mV - 5 V; High level: 250 mV - 10 V. Variable low-pass filter: 50 - 200 Hz (12 dB/octave). Subsonic filter: 24 dB at 25 Hz. CEA-2006 compliant. Frequency response: 25 - 200 Hz. Installation requires 8 gauge power and ground wiring. Dimensions: 7-3/16" W x 8-1/8" D x 2-3/8" H. Harmony Audio HA-AK10 10 Gauge Amp Install Kit (Nickel): Complete 10 gauge amplifier installation kit rated for 600W to support the amplifier and subwoofer package. This bundle provides a vehicle-specific sealed dual-12" enclosure plus two 12" Rhythm Series subs, a compact 600W class D monoblock amplifier, and a full 10 gauge installation kit for an integrated Tundra Crew Max bass solution.