12HP 2 Stroke Outboard Motor Fishing Boat Engine w/ Water Cooling CDI System Heavy Duty

Notes 1. Please note that this product must be started in water, and it is not allowed to start the engine on shore. 2. Please note that the two-stroke outboard engine must use a mixture of 92 # gasoline and two-stroke engine oil. In addition, gasoline and oil must be premixed and stirred evenly before being poured into the tank. 3. Please note that the running-in period is about 10 hours or one month. During the running-in period, do not drive with a high throttle. 4. The volume ratio of gasoline to oil during the running-in period of the new engine is 25:1. After the running-in period, the volume ratio of gasoline to oil is 50:1. 5. Replace the gear oil after the running-in period, and the second replacement time is after 100 hours or about 6 months; 6. When the outboard motor is started, loosen the exhaust screw on the fuel tank cover counterclockwise. The emergency flameout rope shall be inserted, and the other end shall be placed on the wrist or belt. 7. When the motor has no water outlet, please stop using it immediately, and then check the water pump impeller or check whether the water outlet is blocked. 8. To avoid scratching the cylinder, please do not do the following: start the motor in the water；use the motor when it stops cycling water. 9. Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering. Enjoy Sailing: The 2-stroke 12hp engine with 5500rpm can provide 661-1763lbs thrust and 8-30 km/h speed to give you a comfortable and labor-saving sailing experience. Multi-gear Cruise: This product has three gears for infinitely variable transmission: forward gear, neutral gear, and reverse gear, and you can also cruise at a constant speed so that you can enjoy different cruise experiences according to your needs. Convenient to Use: The CDI ignition device and manual start allows you to start quickly and safely. The flameout switch on the handle allows you to stop the engine with one button, providing convenience and saving time. Excellent Heat Dissipation: Its water cooling system helps to cool the motor and has better performance. The design of the vent can also extend its service life.